I have been using a Primera Bravo Pro on my MacPro for 2 years now. Most of that time i have experienced many problems, however, with perseverance comes the answers if you look long enough.
One of the most frustrating issues was a faded start to discs when printing successive discs. This has been reported to be a known Mac/Bravo Pro issue and so far the fix appears to be in the following information.
[start article]
If you have recently changed the image sharpening value to "12" as described in this article
http://www.simonmalcolm.com/blog/bravo_fix.pdf
you may need to change it back to "11". If this problem continues to happen you may need to switch between these values.
Use "12" for partial coverage prints with black text or graphics.
Use "11" for full coverage prints.
[end article]
I have changed the value to 11 and have since found no problem in good quality prints in close succession of each other.
Hope this helps.
Simon Malcolm, Australia.
Posted by: Simon Malcolm on Jul 28, 2008 at 3:44:08 pm
